There are two versions of the Water Level Meter:
One with a small diameter probe and one with a diameter standard
Probe diameter: 14mm/25mm
Probe length: 150mm
Probe material : Austenitic stainless steel
Tape type: Steel mm markings
Tape width: 11.5mm
Tape coating: Polyethylene
Tape lengths: 30, 50, 100, 150, 200, 250, 300, 400, 500 meters
Reel type: Polypropylene
Reel diameter: 230mm
Audible indicator: 88 dB (A) buzzer
Visual indicator: Red LED
Power: 9 volt PP3 battery
Temperature range -20 to +80°C
When the probe of the 500m water well depth measuring device comes into contact with the water/conductive liquid, the liquid completes the internal circuit which is signaled by the lighting of the LED as well as an audible sound (beep). The depth of the water can be read through the tape..
1.All 500m Water Well Depth Measuring Devices should be stored in an environment that is protected from direct sunlight. Storage areas should be free from rodents.
2.When 500m Water Well Depth Measuring Devices are not in use, it is recommend that the measuring tape is neatly wound onto the reel and the probe placed in its holder.
3.For extended periods of non-use, it is recommended that the battery is disconnected.
4.If the unit has been used in contaminated product it is recommended that the probe and tape is rinsed in clean water before storage.
Who need to use this device:
Installers, field engineers and technicians who need to acquire water level measurements using a Water Level Meter.
•One instrument reads at many locations
•Contoured tape for accurate readings
•Tape range; 30m–500m with 1mm resolution
•Audible (buzzer) and visual (LED light) water level alert signals
•Sensitivity adjustment for variations in water conductivity
•Digital temperature indicator option available
•Non-stretch polyethylene coated steel tape
•Ø14mm slimline probe available