This Engineering Anchoring Drilling Rig with features long feed stroke, large capacity, easy to operate and move etc. It is better idea anchoring drill rig for anchoring bar, consolidating and strengthening engineering and all other engineering geological drilling.The drilling rig is mainly used in soil and rock anchoring, consolidation of road base, dam base and retaining wall, and blasting hole drilling and jet-grouting.
1.The drill rig is with mechanical transmission and hydraulic feed, drill hole dia. is mainly 110—130mm(can reach 180mm), drilling capacity 60 m, can drill at any angle between horizontal and vertical.
2.Long feeding stroke reaching 2300 mm with 2 m drill rod.
3.Using with rotation drilling and percussion –rotation drilling, drill efficiently.
4.Support cylinder, it is easy to adjust the angle of the mast.
5.With crawler, it is easy and fast to find out the drill hole position.
ZS1115 15kW 2200r/min
Drilling hole dia
130mm mainly (can reach 180mm)
any angle between vertical and horizontal
Φ50mm or Φ73mm; length 2 m
Rated pull force
Rated push force
mechanical top-drive head
2300mm; 1500mm(shorter mast type);
48;88;162;281 r/min,reverse speed:39r/min
Max. tow force
less than 30°
Drilling vertical hole
Drilling horizontal hole(transportation state)
Weight of drill body
excluding the power unit