GDC geotechnical pile caliper and inclination tester log is a tool lowered into a borehole to measure the diameter and shape of the hole as a function of depth. GDC geotechnical pile caliper and inclination tester log also records the well diameter and inclination, helping the drilling team gain valuable insight that can be used to tell if the well is still travelling along the planned path.
GDC geotechnical pile caliper and inclination tester is composed of model GDC-1EG control case, model JJY-6 caliper /inclinometer measuring probe, model JNC-2 sediment/inclinometer measuring probe, model JC-100 automatic cabling winch, pulley and so on.
Length of cable: 100m（The length can be customized）
Tensile force of cable: ≥0.35t（The tear-out force is 0.65t）
Cabling speed: 10m/min
Net weight of the winch: 50kg
Power of motor: 550W
Dimension: 600mm×450mm×350mm. Hand-cranking height is 600mm.
Cabling mode: Automatic
2. Working temperature：
Measuring probe: 0℃～50℃
Units on the ground: -10℃～45℃
3. Relative humidity:＜85%
4. Power supply: AC(220V±10%), 50Hz