GPS PPK RTK Updated Kit for DJI Phantom 4 Drone PPK Kit
Why install GPS PPK Update kit on Phantom 4?
By update our self-developed PPK with post-process module to get higher position, the accuracy has been improved from the original meter level to the centimeter level! The accuracy error of aerial survey results is within 5CM. Without ground control points, complex terrain can also reduce the number of ground control points by more than 80%! PPK post-process module without communication link, with combined solution mode of pre-calculation and post-calculation, can provide a fixed rate and be more efficient than RTK that requires communication. PPK module is the best choice for drones with high-precision solutions.
Deatiled Features for GPS PPK Update kit
1.The PPK positioning accuracy is up to 1-2 cm, which can meet the 1:500 topographic survey
2. Lightweight GNSS retrofit kit, weighs only 60g
3. Free base station mode, support cloud solution
4. Reduce ground control points by more than 80%
5. Built-in battery, can be used for about 12 hours, non-destructive installation
6. One year warranty, 7*24 hours technical online support
Tehcnial Specification for F1 GPS PPK Kit
Physical | Size | 56.4 * 45.3 * 14.6 mm |
Weight | 56g | |
Operating temperature | -20~+65℃ | |
Electrical | Battery capacity | 4.2V 1500mAh |
Charging method | USB | |
Antenna voltage | 3.3V | |
Working time | 12 hours | |
Position | Horizontal accuracy | 20 mm + 1 ppm |
Vertical accuracy | 40 mm + 2 ppm | |
Interface | TF card | |
LED lights: power, recording, satellite, trigger | ||
DJI trigger sensor | ||
Antenna interface MCX | ||
Data | output format | NMEA, LLH/XYZ |
Recording format | Rinex, NMEA | |
Update rate | 5 Hz | |
Storage | 16 GB | |
GNSS | Signal | GPS/QZSS L1 |
GLONASS G1 | ||
Beidou B1 | ||
Galileo E1 | ||
SBAS | ||
Channel | 72 |
Working video: